2020 Honda CRF250R-RX Owner's Manual (Page 136 of 204)

2020 Honda CRF250R-RX Owner's Manual
Posted on 19 Nov, 2019
Model: 2020 Honda CRF250R-RX
Pages: 204
File size: 34 MB

Get Manual

Online Viewer
128 Servicing Your Honda
Drive Chain
Check the upper drive chain roller (1) and lower
drive chain roller (2) for wear or damage.
Measure the diameter of the drive chain rollers and
replace them if below the service limit.
Service Limit:
Upper roller: 1.2 in (31 mm)
Lower roller: 1.2 in (31 mm)
Replace the roller if necessary as follows.
Install the upper drive chain roller (Green) with the
mark (3) facing toward the bracket and lower
drive chain roller (Black) with the “ mark facing
toward outside.
Clean the threads of the drive chain roller bolt (4)
thoroughly.
Apply locking agent to the drive chain roller bolt
threads.
Install the drive chain roller bolt and nut (5).
Tighten the drive chain roller bolt and nut to the
specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
1. Loosen the rear axle nut (1).
2. Loosen the chain adjuster lock nuts (2) and
turn the adjusting bolts (3) counterclockwise to
decrease slack or clockwise to increase slack.
Align the index marks (4) of the axle plates (5)
with the same reference marks (6) on both
sides of the swingarm.
3. Tighten the rear axle nut to the specified
torque:
94 lbf·ft (128 N·m, 13.1 kgf·m)
4. Recheck chain slack and adjust as necessary.
5. Turn the adjusting bolt counterclockwise until
it touches the axle plates lightly. Then tighten
the chain adjuster lock nuts to the specified
torque while holding the adjusting bolts with a
wrench:
20 lbf·ft (27 N·m, 2.8 kgf·m)
(CRF250R)
Commercially prepared drive chain lubricants may
be purchased at most motorcycle shops and should
be used in preference to motor oil. Pro Honda HP
Chain Lube or an equivalent is recommended.
Saturate each chain joint so that the lubricant
penetrates the space between adjacent surfaces of
the link plates and rollers.
(CRF250RX)
Lubricate the drive chain with Pro Honda HP
Chain Lube or an equivalent chain lubricant or
drive chain lubricant designed specifically for use
with O-ring chains. Wipe off the excess chain
lubricant.
Commercial chain lubricants not designed for
motorcycle drive chains may contain solvents
which could damage the O-rings.
Drive Chain Rollers
(1) upper drive chain roller (Green)
(2) lower drive chain roller (Black)
(3) “ ” marks
(4) drive chain roller bolt
(5) drive chain roller nut
(3)
(4)
(5)
(1)
(2)
(3)
Adjustment
(1) rear axle nut (4) index mark
(2) chain adjuster lock nut (5) axle plate
(3) adjusting bolt (6) reference marks
(2)(6)
(1)
(5)
(4)
(6) (3)
Lubrication


General
Year 2020
Make Honda
Model CRF250R-RX
Language English
Pages 204
Filetype PDF (Download)
File size 34 MB
2020 Honda CRF250R-RX Models

Privacy Policy    Contact us