Manual Description
Remove the oil filler cap/dipstick from the front crankcase cover and wipe it clean. The oil level should be between the upper level mark and the lower level mark on the dipstick. Make sure the oil is between the upper and lower level marks on the dipstick.
Make sure the oil level is at the lower edge of the oil filler inspection hole. Change the oil with the front final gear at normal operating temperature to assure complete and rapid draining. Change the oil with the rear final gear at normal operating temperature to assure complete and rapid draining.
Water that is high in mineral content or salt may be harmful to the aluminum engine. This coolant solution is recommended for most operating temperatures and provides good corrosion protection. Always let the engine and radiator cool down before removing the radiator cap.
Manual Cover
General
