Move the wheel to the right to separate it
from the final drive gear case.
Remove the wheel.
u Support the brake caliper assembly so
that it doesn’t hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc or pad surfaces.
u Do not push the brake pedal while the
brake caliper is removed.
Before installing the wheel, check that the
wheel hub and final drive gear splines are
coated with molybdenum disulfide paste.
Recommended molybdenum disulfide
(USA only) Pro Honda Moly 60 Paste or
Position the wheel between the swingarm
and the final drive gear case.
Be sure the splines on the wheel hub
fit into the final drive gear case.
Install the side collar into the wheel hub.
Install the rear brake bracket, washer, bolt
and rear brake bracket bolt.
20170804181417_31MJA6000_enu_BOOK Page 97 Friday, August 04 2017 18:20:32 JST
Tire Puncture u Removing Wheels