Remove the headlight bolts from the
Gently pull the lower end of the headlight
forward and remove the headlight.
Disconnect the connector.
Remove the seat rubber.
Unhook the pin and remove the bulb.
Install a new bulb and parts in the reverse
order of removal.
Install the seat rubber with its TOP
mark facing up.
Tighten the headlight bolts.
Torque: 3.0 lbf·ft (4.1 N·m, 0.4 kgf·m)
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
isopropyl (rubbing) alcohol.
20170804180835_31MJA8000_enu_BOOK Page 96 Friday, August 04 2017 18:14:25 JST
Electrical Trouble u Burned-out Light Bulb