Features of your vehicle
Manual heating and air condition-
The heating and cooling system can be
controlled manually by pressing buttons
or turning knob(s) other than the AUTO
button. In this case, the system works
sequentially according to the order of
buttons or knob(s) selected.
1. Start the engine.
2. Set the mode to the desired position.
For improving the effectiveness of
heating and cooling;
3. Set the temperature control to the
4. Set the air intake control to the outside
(fresh) air position.
5. Set the fan speed control to the
6. If air conditioning is desired, turn the
air conditioning system on.
Press the AUTO button in order to con-
vert to full automatic control of the sys-
The mode selection button controls the
direction of the air flow through the venti-
The air flow outlet port is converted as
Refer to the illustration in the “Manual cli-
mate control system”.
Air flow is directed toward the upper body
and face. Additionally, each outlet can be
controlled to direct the air discharged
from the outlet.
Air flow is directed towards the face and
Most of the air flow is directed to the
floor, with a small amount of the air being
directed to the windshield and side win-
Floor & Defrost
Most of the air flow is directed to the floor
and the windshield with a small amount
directed to the side window defrosters.
■ Type A