2. Secure the child restraint anchor attach-
ments to the LATCH lower anchors. Check
to make sure the LATCH attachment is
properly attached to the lower anchor.
3. For child restraints that are equipped with
webbing mounted attachments, remove
any additional slack from the anchor at-
tachments. Press downward and rearward
firmly in the center of the child restraint
with your hand to compress the vehicle
seat cushion and seatback while tighten-
ing the webbing of the anchor attach-
ments.
4. Before placing the child in the child re-
straint, hold the child restraint near the
LATCH attachment and use force to push
the child restraint from side to side, and
tug it forward to make sure that it is
securely held in place. It should not move
more than 1 in (25 mm). If it does move
more than 1 in (25 mm), pull again on the
anchor attachments to further tighten the
child restraint. If you are unable to prop-
erly secure the restraint, move the re-
straint to another seating position and try
again, or try a different child restraint. Not
all child restraints fit in all types of ve-
hicles.
Rear facing — step 2
SSS0649
Rear facing — step 3
SSS0639
Rear facing — step 4
SSS0650
Safety — Seats, seat belts and supplemental restraint system 1-27
w —
—
07/02/07—pattie
X