70 MAINTENANCE AND ADJUSTMENT
j
A. Flywheel
B. Flywheel & Pulley Holder (Special Tool:
57001-1605)
•
Tighten the clutch spring bolts to the specified
torque.
Tightening Torq
ue
Clutch Spring Bolts:
9.3N·m(0.95kgf·m,82in·lb)
•
Re
place the c lutch cover gaske t with a new o ne.
•
Turn the clutch release lever toward the rear so
that the push rod fit into the release lever shaft.
•
Install the clutch cover to the crankcase, making
sure that the two dowel pins are installed between
mating surfaces.
•
Tighten t he clutch cover bolts to the specified
torque.
Tightening Torque
Clutch Cover Bolts:
9.4 N·m (1.0 kgf·m, 83 in·lb)
•
Check
the clutch relea se lever position by mea-
suring the position distance between the lever and
the cable bracket while pushing the clutch release
leve
r lightly forward.
A. Clutch Release Lever
B. Push forward
C. Cable Bracket
D. Position Dist an ce (Between Lever and Cable
Bracket)
Position Distance
Standard 48 58 mm (1.9 2.3 in.)