MAINTENANCE AND ADJUSTMENT 143
j
A.TopPlugWrench(SpecialTool:57001-1645)
B. Axle Holder Bottom
C. Locknut
•
Remove the front fork from the fork spring com-
pressor (special tool: 57001-1771) with care not
to drop the top plug wrench (special tool: 57001
-1645), and hold the axle holder with a vise.
NOTE
Protect the axle holder with a soft jaw or heavy
cloth when using a vise.
WARNING
If the axle holder is not securely clamped, the
front fork assembly may come out of the vise
when compressed, which could cause an ac-
cident resulting in injury. However, clamp-
ing the axle holder too tightly can damage it
which will affect riding stability. Use protec-
tive aluminum covers on the jaws of the vise
and do not tighten the vise excessively.
•
Remove the piston rod puller.
A. Top Plug Wr
ench (Special Tool: 57001-1645)
B. Piston Rod Puller
•
Replace the O-ring on the right front fork bottom
plug with a new one and apply specified fork oil to
the O-ring.