52 MAINTENANCE AND ADJUSTMENT
j
NOTICE
When removing the spark plug cap, do not
pull the lead. The lead could be broken off or
damaged the wires in
side.
A. Spark Plug Cap
•
Loosen and remove the spark plug with a suitable
wrench (16 m m, 0.63 in.).
•
When reinsta
lling the spark plug, torque it to spec-
ification.
Tightening Torque
Spark Plug:
13 N·m (1.3 kgf
·m, 115 in·lb)
•
Install the spark plu
g cap so that it is aligned with
the line on the cylinder head cover.
•
Pull u p the plug cap lightly to make sure of the
installation of the spark plug cap.
A. Spark Plug C
ap
B. Line
•
Makesurethatthedampersareinplaceonthe
frame and are not damaged. If the dampers are
not fixed com pletely, reattach t hem with an a dhe-
sive. If the dampers are damaged, replace them
with new ones.