78 MAINTENANCE AND ADJUSTMENT
j
Friction and Steel Pl
ate Warp
Standard
Maximum 0.15 mm
(0.0059 in.) or less
Friction
Plate
Service Limit 0.3 mm (0.012 in.)
Standard
Maximum 0.2 mm
(0.008 in.) or less
Steel Plate
Service Limit 0.3 mm (0.012 in.)
A. Surface Plate
B. Friction or Steel Plate
C. Thickness Gauge
Clutch Hub Installation
•
Install all parts in the reverse order of removal.
•
Replace the clutch hub nut with a new one.
•
Install t he clutch hub.
•
Install the spacer wi
th th e “OUTSIDE” is facing
outside.
A. Spacer
B. “OUTSIDE”
•
Replace the clutch hub nut with a new one.
•
Tighten the clutch hub nut with using the clutch
holder (specia
l tool: 57001-1243) to the specified
torque.
Tightening Torque
Clutch Hub Nut:
100N·m(10.2kg
f·m, 7 3.8 ft·lb)
Friction and Steel Plate Installation
•
In
stall all parts in the reverse order of removal.
•
Install the friction plates and stee l plat es, alternat-
ingbetweenthetwo;besuretostartandfinish
w
ith a friction plate.