MAINTENANCE AND ADJUSTMENT 51
j
•
Check to see if the mid
dle mark of the three-marks
on the stator coil plate is aligned with the straight
surface of the projection on the crankcase.
A. Middle Mark
B. Stator Coil Plate
C. Straigh t Surface
•
If the marks are not aligned, loosen the stator
coil plate moun
ting screws and turn the stator coil
plate.
A. Stator Coil Pla te Mou ntin g Screw s
B. Stator Coil Plate
•
Tighten the stator coil plate mounting screws to the
specified torque.
Tightening Torque
Stator Coil Plate Mounting Screws:
5.2N·m(0.53kgf·m,46in·lb)
•
Replace the magneto cover gasket with a new
one.
•
In
stall the magneto cover.
•
Hold the carburetor overflow hose to t he clamp on
the magneto cover.
NOTE
○
The ignition timing can be adjusted to change the
power b and to su it the rider’s prefere n c e or ability.