80 HOW TO OPERATE
j
A. Vehicle Battery Positive (+) Terminal
B. From B ooster Battery Positive (+) Terminal
C. From Booster B
attery Negative (–) Terminal
D. Bracket Bolt
•
Connect another jumper cable from the negative
(–) terminal of the booster battery to the bracket
bolt on the engine.
NOTICE
Do not connect the booster battery to the fol-
lowing portions as a ground.
•
Battery negative (–) terminal
•
Electrical components or leads
•
Fuel line or fuel relative components
DANGER
Batteries contain sulfuric acid that can cause
burns and produce hydrogen gas which is
highly explosive.
•
Do not make this last connection at the fuel
system or battery.
•
Take care not to touch the positive and
negative cables together, and do not lean
over the battery when making this last con-
nection.
•
Do not connect to a frozen battery. It could
explode.
•
Do not reverse polarity by connecting pos-
itive (+) to negative (–), or a battery explo-
sion and serious damage to the electrical
system may occur.
•
Follow the standard engine starting procedure.
NOTICE
Do not operate the starter continuously for
more than 5 seconds, or the starter overheat
and the bat
tery power will drop temporarily.
Wait 15 seconds between each operation of
the starter to let it coo l and for the battery t o
recover p
ower.
•
After th
e engine starts, disconnect the jumper ca-
bles. Disconnect the negative (–) cable from the
vehicle first.