106 MAINTENA NCE AND ADJUSTMENT
j
A. Fron t Final Gear Case
B. Oil Filler Cap and O-ring
NOTICE
Be careful not to allow any dirt or foreign ma-
terials t o enter the gear case.
•
Check the oil level. The oil level should come to
the bottom of the filler o pening. If it is lo w, a dd oil
through the oil filler opening as n ecessary.
A. Front Final Gear Case
B. Filler Opening
C. Bottom of the F
iller Opening
•
Replace the O-ring with a new one, and apply
grease to it.
•
Install the oil filler cap with the new O-ring and
tighten it to the specified torque.
Tightening Torque
Front Final Gea
r Case Oil Filler Cap:
16 N·m (1.6 kgf·m, 12 ft·lb)
•
Clean any oil and grea s e from th e oil filler cap and
surrounding area after tig h te nin g the oil f iller cap.
NOTE
○
Use the same type and brand of oil that is already
in the gear case.