HOW TO OPERATE 75
j
WARNING
Shifting to Locked-Axle Mode while turning
or before entering a turn can reduce steering
response, increasing the effort to turn. An
unexpected change in direction can cause
the operator to lose control, resulting in an
accident and injury. Do not shift to Locked
-Axle Mode while turning or before entering
a turn.
Shifting to Differential (Unlocked-Axle) Mode
•
Pull and hold the
stopper, then move the s hift lever
all the way up (UN-LOCK).
NOTE
○
When the shift lever is moved, the differential may
not immediately lock or unlock until the vehicle has
rolled a short d
istance.
When Stuck
Release the thro ttle
pedal immediately to protect
the drive belt and take the following actions to es-
cape from the stuck condition.
•
Change the gear shift lever to the “L” (Low) posi-
tion (KAF400H/K/L/M/N), change the 2WD/4WD
shift lever “4WD” po
sition (KAF400 H /K/L/M/N),
change the differential shift lever to the “LOCK”
position, and try to escape by slowly revving up
the engine. Refer t
o the “Shifting the Differential”
section in this chapter.
•
If the above method is not successful, you can use
a winch installed
at the front of the vehicle (Winch
is an optional part.) or seek help from another
vehicle for towing.