144 MAINTENANCE AND ADJUSTMENT
j
•
Connect the positive ( +) cable to the
(+) terminal, and then connect the
negative (–) cable to the (–) terminal.
NOTICE
Installing the negative (–) cable
to the (+) terminal of the battery
or the positive (+) cable to the (–)
terminal of the battery can seri-
ously damage the electrical sys-
tem.
•
Put a light coat of grease on the ter-
minals to prevent corrosion.
•
Cover the (+) terminal with the red
cap.
•
Install the removed parts.
NOTE
○
Install the clamps sideways so that
the clamps are parallel to the bracket.
○
Bend the clamps and hold the battery
cables with them to prevent the ca-
ble from interfering with the edges of
other parts.
Headlight
Headlight aiming should be done by
an authorized Kawasaki dealer.
Horizontal Adjustment
The headlight beam is adjustable
horizontally. If not properly adjusted
horizontally, the beam will point to one
side rather than straight ahead.
•
Turn the horizontal adjuster in or out
until the beam points straight ahead.