Online Viewer
Manual Description
Engage Indicator Setting: ENGAGE LAMP: The engage indicator can be used in closed course competition. Do not use the engage indicator during everyday riding. The engage indicator is used to indicate the preferred timing for clutch engagement under the following conditions: transmission is in 1st gear; the clutch lever is pulled in; and the vehicle speed is less than 5 km (3.1 mph). To adjust the engage indicator engine speed setting in the multifunction meter, do the following while the engine is stopped.
Push the upper or lower button to align the cursor to “ENGAGE LAMP” after setting the language. Push and hold the “SEL” button until the previous engage indicator setting blinks. Push the upper or lower button to adjust the engage indicator engine speed setting. The engine speed timing advances in 100 r/min (rpm) increments up to its maximum setting.
Select the OFF mode to disable the engage indicator when it is not required. The adjustment range for this function is between 1 200 ∼ 6 000 r/min (rpm). Once the maximum engine speed setting for the engage indicator has been reached, the increments revert to the minimum setting engine speed.
Manual Cover
General