MAINTENANCE AND ADJUSTMENT 181
j
Vertical Adjustment
The headlight beam is adjustable ver-
tically. If adjusted too low, neither low
nor high beam will illuminate the ro ad
far enough ahead. If adjusted too high,
the high beam will fail to illuminate the
road close ahead, and the low beam
will blind oncoming drivers.
•
To move the headlight beam upward,
turn the both adjusters counterclock-
wise same number.
Both Adjusters
Counterclockwise
•
To move the headlight beam down-
ward, turn the both adjusters clock-
wise same number.
Both Adjusters
Clockwise
NOTE
○
On high beam, the brightest points
should be slightly below horizontal.
The proper angle is 0.4 degrees be-
low horizontal. This is a 5 0 mm (2.0
in.) drop at 7.6 m (25 ft) measured