78 HOW TO OPERATE
j
○
If the meter display d
oes not change when you
want to shift from “4WD” to “DIFF-LOCK,” the elec-
tric shifting mechanism is functioning but the shift-
ing is no t completin
g. Turn the steering wheel left
or right s ome times to assist the shifting.
Shifting to Differential (Unlocked-Axle) Mode
•
Stop the vehicle co mpletely.
•
Turn the s electable 2WD/4WD/DIFF-LOCK shift
switch to “4WD” position.
If the unsuccessful display appears on the multi-
function meter, do one of the following procedures
to cancel the display.
•
Turn the s electable 2WD/4WD/DIFF-LOCK shift
switch to the or
iginal position while stopping the
vehicle.
•
Turn the ignition switch to “OFF” position while
stopping the v
ehicle.
If the unsuccessful display cannot be canceled,
the electric shifting mechanism may have a failure.
See an authori
zed Kawasaki deale r for inspection.
When Stuck
Release the thro ttle
pedal immediately to protect
the drive belt and take the following actions to es-
cape from the stuck condition.
•
Change the shift lever to the Low position, turn
the selectable 2WD/4WD/DIFF-LOCK shift sw itch
to the “ DIF F-LOCK” p
osition, and try to escape
by slowly revving up the engine. Refer to the
“2WD/4WD/Differential Shifting” section in this
chapter.
•
If the above method is not successful, you can use
a winch installed at the front of the vehicle (Winch
is an optional par
t.) or seek help from another
vehicle for towing.