157
4
4
Features of your vehicle Lighting
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7
times.
You can activate or deactivate the
One Touch Turn Signal function or
choose the number of blinking (3, 5,
or 7) by selecting "User Settings →
Lights → One Touch Turn Signal".
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical connec
-
tion in the circuit. The bulb may
require replacement.
Operating front fog light (if
equipped)
Fog lights are designed to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
The fog lights will turn on when the
fog light switch (1) is turned to the
on position after the headlamp is
turned on.
To turn off the fog lights:
Turn the fog light switch (1) to
the ON position.
When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor.
High Beam Assist (HBA)
High Beam Assist will automatically
adjust the headlamp range
(switches between high beam and
low beam) depending on the bright
-
ness of detected vehicles and cer
-
tain road conditions.