27
5
5
Driving your vehicle Brake system
4. Press the accelerator pedal while
the gear is in R (Reverse), D
(Drive) or manual mode.
Make sure the brake warning light
goes off.
For your safety, you can engage
the EPB even though the ENGINE
START/STOP button is in the OFF
position, but you cannot release
it.
For your safety, press the brake
pedal and release the parking
brake manually with the EPB
switch when you drive downhill or
when backing up the vehicle.
Do not follow the above procedure
when driving on a flat level ground.
The vehicle may suddenly move for
-
ward.
If the parking brake warning light is
still on even though the EPB has
been released, have the system
checked by an authorized Kia dealer.
Do not drive your vehicle with the
EPB applied. It may cause excessive
brake pad and brake rotor wear.
Automatic application of EPB
The EPB is applied automatically
under following conditions.
Shift to P (Park) on a slope
Engine OFF while AUTO HOLD is
enabled
When the vehicle moves a bit in P
(Park) position
Conditions below while AUTO
HOLD is activated
- Driver's door is opened
- Hood is opened
- Liftgate is opened
- Vehicle stops for more than
approximately 10 minutes on a
steep slope
Requested by other systems
For Electronic Parking Brake (EPB)
equipped vehicles with AUTO HOLD
function used while driving, if the
ENGINE START/STOP button has
been turned OFF, the EPB will be
engaged automatically. Therefore,
AUTO HOLD function should be
turned off before the ENGINE
START/STOP button is turned off.