39
5
5
Features of your vehicle Mirrors
locks, security systems, even home
lighting. Both standard and rolling
code-equipped transmitters can be
programmed by following the out
-
lined procedures. Additional Home
-
Link
information can be found at:
www.homelink.com or by calling 1-
800-355-3515.
* HomeLink
is a registered trade
-
mark of Gentex Corporation.
Retain the original transmitter of
the RF device you are programming
for use in other vehicles as well as
for future HomeLink
programming.
It is also suggested that upon the
sale of the vehicle, the programmed
HomeLink
buttons be erased for
security purposes.
Programming HomeLink
When programming a garage door
opener, it is advised to park the
vehicle outside of the garage.
It is recommended that a new
battery be placed in the hand-
held transmitter of the device
being programmed to HomeLink
for quicker training and accurate
transaxle of the radio-frequency
signal.
Some vehicles may require the
POWER button to be ACC (or
"Accessories") position for pro
-
gramming and/or operation of
HomeLink
.
In the event that there are still
programming difficulties or ques
-
tions after following the pro
-
gramming steps listed below,
contact HomeLink
at:
www.homelink.com or 1-800-
355-3515.
Standard programming
To train most devices, follow these
instructions:
1. Press and release (1), (2) or (3)
button.
If the indicator (4) is turned ON
in Orange, go to Step 3 since it
is a new programming.
If the indicator (4) is continu
-
ously turned ON or flashes in
Green rapidly several times, go
to Step 2 since it is a pro
-
grammed button.
2. Press and hold the button you
wish to program about 15-25