117
5
5
Features of your vehicle Automatic climate control system
the fan speed control to the high
-
est speed.
If warm air to the floor is desired
while defrosting or defogging, set
the mode to the floor-defrost
position.
Before driving, clear all snow and
ice from the windshield, rear win
-
dow, outside rear view mirrors,
and all side windows.
Clear all snow and ice from the
hood and air inlet in the cowl grill
to improve heater and defroster
efficiency and to reduce the prob
-
ability of fogging up the inside of
the windshield.
Defogging inside windshield with
the automatic climate control
1. Set the fan speed to the desired
position.
2. Select desired temperature.
3. Press the defroster button ( ).
4. The outside (fresh) air position
will be selected automatically and
the air conditioning will turn on
according to the detected ambi
-
ent temperature.
If the air conditioning and outside
(fresh) air position are not selected
automatically, adjust the corre
-
sponding button manually. If the
position is selected, lower fan
speed is adjusted to a higher fan
speed.
Defrosting outside windshield with
automatic climate control
1. Set the fan speed to the highest
position.
2. Set the temperature to the
extreme hot (HI) position.
3. Press the defroster button ( ).
4. The outside (fresh) air position
will be selected automatically and
the air conditioning will turn on
according to the detected ambi
-
ent temperature.
Defogging logic (if equipped)
To reduce the possibility of fogging
up the inside of the windshield, the