91
6
6
Driving your vehicle Smart Cruise Control (SCC)
If there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead.
On a steep grade, the vehicle may
slow down or speed up slightly while
going uphill or downhill.
Vehicle speed may decrease on an
upward slope and increase on a
downward slope.
The speed will be set to 30 km/h (20
mph) when there is a vehicle ahead
and your vehicle speed is 0 km/h (0
mph) ~ 30 km/h (20 mph).
Smart Cruise Control conditions not
met
The drivers door is opened.
The vehicle is shifted to N (Neu
-
tral) / R (Reverse) / P (Parking).
The parking brake is applied.
The vehicle speed is not within
the specified Smart Cruise Control
range.
The ESC (Electronic Stability Con
-
trol), TCS (Traction Control Sys
-
tem) or ABS is operating.
The ESC (Electronic Stability Con
-
trol), TCS (Traction Control Sys
-
tem) or ABS is off.
The sensor cover is extremely
contaminated.
The motor performance is abnor
-
mal.
Forward Collision-Avoidance
Assist is activated.
The motor RPM is in the red zone.
The front radar sensing data is
out of limit.
To increase Smart Cruise Control
set speed:
Follow either of these procedures:
Move the switch up (to RES+), and
hold it. Your vehicle set speed will
increase by 10 km/h (5 mph).
Release the switch at the speed
you want.
Move the switch up (to RES+), and
release it immediately. The cruis
-
ing speed will increase by 1.0 km
(1.0 mph) each time you move the