Maintenance
648
Appearance care
After washing the vehicle, test the
brakes while driving slowly to see if
they have been affected by water. If
braking performance is impaired,
dry the brakes by applying them
lightly while maintaining a slow for
-
ward speed.
Wetting motor compartment
Water washing in the motor com
-
partment including high pressure
water washing may cause the
failure of electrical circuits located
in the motor compartment.
Never allow water or other liquids
to come in contact with electrical/
electronic components inside the
vehicle as this may damage them.
To prevent damage to the
charging door, make sure to close
and lock the vehicle doors when
washing (high-pressure washing,
automatic car washing, etc.) the
vehicle.
Waxing
Wax the vehicle when water will no
longer bead on the paint.
Always wash and dry the vehicle
before waxing. Use a good quality
liquid or paste wax, and follow the
manufacturer's instructions. Wax all
metal trim to protect it and to
maintain its luster.
Removing oil, tar, and similar mate
-
rials with a spot remover will usually
strip the wax from the finish. Be
sure to re-wax these areas even if
the rest of the vehicle does not yet
need waxing.
Drying vehicle
Wiping dust or dirt off the body
with a dry cloth will scratch the
finish.
Do not use steel wool, abrasive
cleaners, acid detergents or
strong detergents containing high
alkaline or caustic agents on
chrome-plated or anodized alumi
-
num parts. This may result in
damage to the protective coating
and cause discoloration or paint
deterioration.
Finish damage repair
Deep scratches or stone chips in the
painted surface must be repaired