17 COOLING SYSTEM
222
S04173-10
–
Remove screws
2
and take off the cover.
–
Remove radiator cap
3
.
– Completely drain the coolant.
–
Mount and tighten screw
1
with a new seal ring.
Guideline
Screw plug, water
pump drain hole
M6 10 Nm (7.4 lbf ft)
S04174-11
–
Remove screws
4
and take off the cover.
–
Loosen bleeder screw
5
.
Guideline
3 turns
– Tilt the vehicle slightly to the right.
– Pour in the coolant until it emerges without bubbles at the
bleeder screw, and then mount and tighten the bleeder screw
immediately.
Coolant ( p. 260)
– Completely fill the radiator with coolant. Mount the radiator
cap.
– Rest the vehicle on the side stand.