Online Viewer
Manual Description
Screwing the push rod into the ball joint adjusts the foot brake lever downwards. Screwing the push rod out of the ball joint adjusts the brake lever upwards. Loosen nut and turn screw correspondingly until the free travel is present.
Sit on the vehicle in the riding position and measure the distance between the upper edge of your boot and the shift lever. The shift lever must not come into contact with any other vehicle components during the shift procedure. Different tire tread patterns can make the vehicle significantly more difficult to control.
Make sure that only tires with a similar tire tread pattern are fitted to the front and rear wheel. Run in new tires with moderate riding and only gradually increase the lean angle. Get used to the handling characteristic of the motorcycle in a suitable area before making a longer trip.
Manual Cover
General
