Manual Description
The rubber grip can only be replaced with the sleeve or the throttle tube. Set the free travel on the front brake lever in accordance with the specification. Check the front and rear brake disc thickness at multiple points for the dimension.
Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule. Move the brake fluid reservoir attached to the right of the handlebar to a horizontal position. Rinse the affected area with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact with the eyes. Press back the brake linings by slightly tilting the brake caliper laterally on the brake disc. Operate the front brake lever several times until the brake linings are in contact with the brake disc and there is a pressure point.
Manual Cover
General