2016 KTM RC 390 CO — Owner's Manual

Posted on 15 Feb, 2017
Model: 2016 KTM RC 390 CO
Pages: 199


File size: 4 MB

Download Manual

Online Viewer

Manual Description
The ABS operates with two independent brake circuits (front and rear brakes). During normal operation, the brake system operates like a conventional brake system without ABS. When the ABS control unit detects a locking tendency in a wheel, ABS begins regulating the brake pressure. The regulating process causes a slight pulsing of the hand and foot brake levers.

ABS warning lamp must light up after the ignition is switched on and go out after starting off. If it does not go out after starting off or if it lights up while riding, this indicates a fault in the ABS. In this case, the ABS is no longer enabled and the wheels may lock during braking. The brake system itself stays functional; only ABS control is not available.

The ABS warning lamp may also light up if the rotating speeds of the front and rear wheels differ greatly under extreme riding conditions, for example when making wheelies or if the rear wheel spins. This causes the ABS to switch off. To reenable the ABS, the vehicle must be stopped and the ignition switched off. The ABS is reenabled when the vehicle is switched on again.

The ABS warning lamp goes out when you start off.

KTM Models

Use of Cookies    Contact us