Power window control
Features and controls 5-45
5
stopped. However, once the driver’s door or
the front passenger’s door is opened, the
power windows cannot be operated.
N00549001182
When this switch is in the lock mode, the sub-
switches cannot be used to open or close the
door windows, and the main switch will open
or close only the driver’s door window. To
unlock the switch, press it again.
N00528801233
If a hand or head is trapped, for safety the
driver’s door window is automatically low-
ered a little.
After the door window is lowered, clear the
obstruction, then pull up the switch again to
close the driver’s door window.
Lock switch
1- Lock
2- Unlock
Before driving with a child in the vehicle,
be sure to lock the window switch to make
it inoperative. Children tampering with
the switch could easily trap their hands or
heads in the window.
Safety mechanism
Type 1
If the battery terminals are disconnected
or the fuse for power window is replaced,
the safety mechanism will be cancelled.
If a hand or head got trapped, a serious
injury could result.
The safety mechanism is deactivated just
before the door window closes. This allows
the door window to close completely. There-
fore be especially careful that fingers are not
trapped in the door window opening.
The safety mechanism is deactivated while
the switch is pulled up. Therefore be espe-
cially careful that fingers are not trapped in
the door window opening.
Do not deliberately trap your hands or head
in order to activate the safety mechanism.
Your hand or head could be trapped and per-
sonal injury could result.
The safety mechanism can be activated if the
driving conditions or other circumstances
cause the driver’s door window to be sub-
jected to a physical shock similar to that
caused by trapped hand or head.
If the following operation is performed, the
safety mechanism will be cancelled and the
driver’s door window will not automatically
open/close completely.
• When the battery terminals are discon-
nected.
• When the fuse for power window is
replaced.
• When the safety mechanism is activated
five or more times consecutively.
In such a case, the following procedure
should be implemented to rectify this situa-
tion.
If the window is open, repeatedly raise the
driver’s door window switch until that win-
dow has been fully closed. Following this,
release the switch, raise the switch once
again and hold it in this condition for at least
1 second, then release it. You should now be
able to operate the driver’s door window in
the normal fashion.
BK0299900US.book 45 ページ 2020年10月2日 金曜日 午後3時37分