2022 Mitsubishi Eclipse Cross Owner's Manual (Page 171 of 435)

2022 Mitsubishi Eclipse Cross Owner's Manual
Posted on 21 Feb, 2023
Model: 2022 Mitsubishi Eclipse Cross
Pages: 435
File size: 80 MB

Get Manual

Online Viewer
Active stability control (ASC)
5-86 Features and controls
5
maneuvers. It works by controlling the engine
output and the brake on each wheel.
N00559401336
The ASC is automatically activated when the
ignition switch is turned to the “ON” position
or the operation mode is put in ON. You can
deactivate the system by pressing down the
ASC OFF switch for 3 seconds or longer.
When the ASC is deactivated, the indica-
tor will turn on. To reactivate the ASC,
momentarily press the ASC OFF switch; the
indicator is turned off.
N00559501252
NOTE
The skid control function operates at speeds
of approximately 9 mph (15 km/h) or higher.
ASC OFF switch
CAUTION
For safety reasons, the ASC OFF switch
should be operated when your vehicle is
stopped.
Be sure to keep the ASC on while driving in
normal circumstances.
NOTE
Using the ASC OFF switch turns off both the
stability control function and the traction
control function.
When moving out of mud, sand or fresh
snow, pressing the accelerator pedal may not
allow the engine speed to increase. In such
situations, temporarily turning off ASC with
the ASC OFF switch will make it easier to
move out your vehicle.
If you continue to press the ASC OFF switch
after the ASC is turned off, the “mistaken
operation protection function” will activate
and the ASC will turn back on.
ASC operation display or ASC
OFF indicator
-
ASC operation display/ASC indicator
The display/indicator will blink when
the ASC is operating.
-
ASC OFF indicator
This indicator will turn on when the
ASC is turned off with the ASC OFF
switch.
CAUTION
When display/indicator blinks, ASC is
operating, which means that the road is slip-
pery or that your vehicle’s wheels are begin-
ning to slip. If this happens, drive slower.
If the temperature in the braking system con-
tinues to increase due to continuous brake
control on a slippery road surface, the
indicator will blink.
To prevent the brake system from overheat-
ing, the brake control of the traction control
function will be temporarily suspended.
The engine control of the traction control
function and normal brake operation will not
be affected.
Park your vehicle in a safe place. When the
temperature in the braking system has come
down, the indicator will be turned off and
the traction control function will start operat-
ing again.
BK0299900US.book 86 ページ 2020年10月2日 金曜日 午後3時37分


General
Year 2022
Make Mitsubishi
Model Eclipse Cross
Language English
Pages 435
Filetype PDF (Download)
File size 80 MB

Privacy Policy    Contact us