Adaptive Cruise Control System (ACC) (if so equipped)
5-98 Features and controls
5
N00581500069
There are two ways to increase the set speed.
The set speed will increase by 1 mph
(1.6 km/h) every time you push up the
“RES +” switch while the ACC is activated.
If you hold the switch pushed up, the set
speed increases in 5 mph (8 km/h) incre-
ments.
When the accelerator pedal is depressed
while driving with the ACC control working,
you can accelerate the vehicle beyond the
presently set speed.
• When driving on a winding road.
Never use the ACC in the following situa-
tions:
• In heavy traffic.
• On winding roads.
• On slippery roads, such as icy, snow-cov-
ered or dirt roads.
• In adverse weather conditions, such as
rain, snow or sand storms, etc.
• On steep downslopes.
• When the inclination of a road fre-
quently changes.
• When the approach alarm frequently
sounds.
• When your vehicle is towed or is towing
another vehicle.
• When your vehicle is on a chassis dyna-
mometer or free rollers.
• When tire inflation pressures are not
adequate.
• When the temporary spare tire is being
used.
• When the radar sensor and/or its sur-
rounding area are damaged or deformed.
To maintain proper performance of the ACC:
• Always clean the surface of the radar sen-
sor.
• Avoid impacting the radar sensor or its sur-
rounding area.
• Do not put a sticker on the radar sensor or
its surrounding area.
• Do not paint the radar sensor.
• Do not install a grill guard.
• Do not modify the radar sensor or its sur-
rounding area.
• Always use tires of the same size, same
type, and same brand, and which have no
significant wear differences.
• Do not modify the vehicle’s suspension.
To increase the set speed
By using the “RES +” switch:
There is some time lag until the vehicle
begins accelerating to the new set speed after
the set speed has been changed.
The set speed can be changed even while
your vehicle is following a vehicle in front
using the ACC. In this case, however,
although the set speed itself is increased,
your vehicle will not accelerate.
While the ACC system is in the stationary
vehicle hold state, the vehicle speed cannot
be set.
By using the accelerator pedal:
BK0299900US.book 98 ページ 2020年10月2日 金曜日 午後3時37分