2022 Mitsubishi Eclipse Cross Owner's Manual (Page 287 of 435)

2022 Mitsubishi Eclipse Cross Owner's Manual
Posted on 21 Feb, 2023
Model: 2022 Mitsubishi Eclipse Cross
Pages: 435
File size: 80 MB

Get Manual

Online Viewer
Combination headlights and dimmer switch
5-202 Features and controls
5
onds after the UNLOCK button on the key is
pressed when the combination headlights and
dimmer switch is in the “OFF” position (if so
equipped) or “AUTO” position (if so
equipped). The welcome light function will
operate only when it is dark outside the vehi-
cle.
N00547301253
This function turns on the headlights in the
low beam setting for approximately 30 sec-
onds after the ignition switch is turned to the
“OFF” position or the operation mode is put
in OFF.
1. Turn the combination headlights and dim-
mer switch to the “OFF” position (if so
equipped) or “AUTO” position (if so
equipped).
2. Turn the ignition switch to the “OFF”
position or put the operation mode in
OFF. Also, if a key was used to start the
engine, remove the key from the ignition
switch.
3. Within 60 seconds of turning the ignition
switch to the “OFF” position or putting
the operation mode in OFF, pull the turn
signal lever toward you.
4. The headlights will come on in the low
beam setting for approximately 30 sec-
onds. After the headlights go off, the
headlights can be turned on again in the
low beam setting for approximately
30 seconds by pulling the turn signal lever
toward you within 60 seconds of turning
the ignition switch to the “OFF” position
or putting the operation mode in OFF. To
turn on the headlights again after 60 sec-
onds of turning the ignition switch to the
“OFF” position or putting the operation
mode in OFF, repeat the process from step
1.
NOTE
While the welcome light function is operat-
ing, perform one of the following operations
to cancel the function.
Press the LOCK button on the key.
Turn the combination headlights and dim-
mer switch to the “ ” or “ ” position.
Turn the ignition switch to the “ON” posi-
tion or put the operation mode in ON.
It is possible to modify functions as follows:
The headlights can be set to come on in the
low beam setting.
The welcome light function can be deacti-
vated.
For details, consult a Mitsubishi Motors
dealer.
On vehicles equipped with the SDA or the
SDA navigation system, screen operations
can be used to make the adjustment.
Refer to the separate owners manual for
details.
Coming home light
NOTE
While the coming home light function is
operating, perform one of the following
operations to cancel the function.
Pull the turn signal lever toward you.
Turn the combination headlights and dim-
mer switch to the “ ” or “ ” position
or put the operation mode in ON.
Turn the ignition switch to the “ON” posi-
tion or put the operation mode in ON.
It is possible to modify functions as follows:
The time that the headlights remain on can
be changed.
The coming home light function can be
deactivated.
BK0299900US.book 202 ページ 2020年10月2日 金曜日 午後3時37分


General
Year 2022
Make Mitsubishi
Model Eclipse Cross
Language English
Pages 435
Filetype PDF (Download)
File size 80 MB

Privacy Policy    Contact us