Manual Description
Do not assume maybe customer means” or maybe customer mentioned this E symptom”. For an intermittent malfunction, it is important to reproduce symptom based on interview with customer and past examples. Most intermittent malfunctions are caused by poor contacts.
In this case, it will be effective to shake suspected harness or connector by hand. H When repairs are performed without any symptom check, no one can judge if malfunction has actually been eliminated. Are there any damage or modification to suspension or body resulting in increased weight or altered ground clearance? Check each link installation condition of suspension and axle.
NG >> Connector terminal connection is loose, damaged, open, or shorted. H Terminal 7 – ground : The voltage has changed from approximately 4. Activate fail-safe function by running the engine speed at 1,500 rpm or higher for 10 seconds with the vehicle stopped.
Manual Cover
General