Manual Description
K Mark and arrange disassembly parts in an organized way for easy troubleshooting and re-assembly. When tightening bolts and nuts, as a basic rule, equally tighten in several different steps starting with the ones in center, then ones on inside and outside diagonally in this order. When replacing and reassembling with dowel pins, make sure that dowel pins are installed in the original portion.
Carefully check engine oil or engine coolant passages for any restriction and blockage. Tap seal cutter to insert it, and then slide it by tapping on the side as shown in the figure. Using scraper, remove old liquid gasket adhering to the gasket application surface and the mating surface.
Apply liquid gasket without breaks to the specified location with the specified dimensions. If there is a groove for liquid gasket application, apply liquid gasket to the groove. After 30 minutes or more have passed from the installation, fill C engine oil and engine coolant.
Manual Cover
General