Manual Description
D Check that there is no wear or damage to the cable, and replace if there is. Inspecting parking brake warning lamp switch is inspected and exchange if there is a faulty. Insert a deep socket wrench to rotate PB adjusting nut (1) and loosen the cable sufficiently.
Using wheel nuts, fix the disc rotor to the hub and prevent it from tilting. After locking, turn the adjuster in J the opposite direction by 5 or 6 notches. Operate lever 10 or more times with a force of 294 N (30 kg, 66 lb).
Rotate adjusting nut with deep socket to adjust lever stroke. When parking brake lever is operated with a force of 196 N (20 kg, 44 lb), check that the stroke is within the specified number of notches. With the lever completely returned, make sure there is no drag on the rear brake.
Manual Cover
General