Manual Description
Operate the vehicle under the same conditions as when the noise originallyoccurred. If you saturatethe area with silicone, you will not be able to recheck the repair. Door striker out of alignment causing a popping noise on startsand stops Tapping or moving the components or pressing on them while driving to duplicate the conditions can isolate many of these incidents.
These conditionsshould be duplicated when verifying and isolating the cause of the noise. Most of these incidents can be repaired by repositioning the component G orapplying urethane tape to the contact area. The best method is to secure, move or insulate one component at a time and test drive the vehicle.
Repairs can usually be made by moving, adjusting, securing, or insulating the component causing the noise. Apply a protective tape around the windshield glass to protect the painted surface from damage. J If a windshield glass is to be reused, mark the body and the glass with mating marks.
Manual Cover
General