Manual Description
If necessary collapsible spacer replacement, remove final drive assembly and disassemble it to replace front oil seal and collapsible spacer. However, it is reusable on a one-time basis only in cases when replacing front oil seal. When collapsible spacer replacement is required, disassemble final drive assembly to replace collapsible spacer and front oil seal.
Install attachment to side flange, and then pull out the side flange with the sliding hammer. Align the matching mark of drive pinion with the matching mark of companion flange, and then install the companion flange. Put a suitable drift on the center of side flange, then drive it until sound changes.
Install side oil seal until it becomes flush with the case end, L using the drift. Install metal connector side of this hose to rear cover by inserting it with aiming painted marking to the front of vehicle. Rotate drive pinion back and forth 2 to 3 times to check for unusual noise and rotation malfunction.
Manual Cover
General