Manual Description
If engine is already started, stop it and allow 10 minutes before checking. Insert oil level gauge and check the engine oil level is within the range (A) shown in the figure. Start the engine and warm it up to normal operating temperature.
Check the engine oil pressure with engine running under no-load. If difference is extreme, check engine oil passage and oil pump for engine oil leakage. After the inspections, install oil pressure switch as follows: a.
Remove old liquid gasket adhering to oil pressure switch and the mating surface. Apply liquid gasket and tighten oil pressure switch to the specification. After warming up engine, check there is no leakage of engine oil with running engine.
Manual Cover
General