Manual Description
D Prevent acid liquid such as battery electrolyte, etc. E Never remove the remaining retainer (2) on hard tube (or the equivalent) (A) except when resin tube or retainer is replaced. F When resin tube or hard tube (or the equivalent) is replaced, also replace retainer with new one.
Removal of main fuel level sensor unit, fuel filter and fuel pump assembly: M i. Raise main fuel level sensor unit, fuel filter and fuel pump assembly, and disconnect quick connector as follows: N Push in tabs (1) and pull out fuel tube (2). Raise and release sub fuel level sensor unit to remove.
Check the connection for damage or any foreign materials. Align the connector with the tube, and then insert the connector straight into the tube until a click sound is heard. After connecting, check that the connection is secure by following method.
Manual Cover
General