2012 Nissan 370Z Repair Manual - Driveline (Section DLN)

2012 Nissan 370Z Repair Manual - Driveline (Section DLN)
Posted on 24 May, 2015
Model: 2012 Nissan 370Z
Pages: 90
File size: 2 MB

Download Manual

Manual Description
Confirm that the dimension of the side flanges (1) installation measurement (A) in the figure comes into the following. Put a suitable drift on the center of side flange, then drive it until sound changes. I Install the hose clamp at the suspension member side, with the tab facing downward.

Turn pinion mate gear, then remove pinion mate gear, pinion H mate thrust washer, side gear and side gear thrust washer from differential case. Install side gear thrust washers with the same thickness as the M ones installed prior to disassembly or reinstall the old ones on the side gears. Align 2 pinion mate gears in diagonally opposite positions, then rotate and install them into differential case after installing thrust washer to pinion mate gear.

Align the lock pin holes on differential case with shaft, and install pinion mate shaft. Using feeler gauge, measure the clearance between side gear back and differential case at 3 different points, while rotating A side gear. If the back clearance is outside the specification, use a thicker/ thinner side gear thrust washer to adjust.


Manual Cover
2012 Nissan 370Z Repair Manual - Driveline (Section DLN) Image


General
Year 2012
Make Nissan
Model 370Z
Language English
Pages 90
Filetype PDF (Download)
File size 2 MB

Privacy Policy    Contact us