Manual Description
If a component may be subject to interference, be sure to protect it with a shop cloth. Then dip a cloth into fresh water, and wring the water out of the cloth to wipe the detergent off. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury.
During normal operation, the C window slightly raises and lowers automatically to prevent any window to vehicle interference. To depressurize the system, disconnect both battery cables starting by negative terminal. G After touching hydraulic fluid, never touch or rub your eyes until you have thoroughly washed your hands.
If a component M may be subject to interference, be sure to protect it with a shop cloth. O After re-installation is completed, be sure to check that each part works normally. ON signal (5th bow latch close signal) is transmitted to soft top control unit when linkage lock position is detected by hydraulic control.
Manual Cover
General