Manual Description
Remove dust and foreign matter adhered to the sensor rotor with a vacuum dust collector through the wheel sensor mounting hole. Read a value (wheel speed) of both normal wheel sensors and error-detecting wheel sensor. Disconnect wheel sensor harness connector and check the each wheel sensor pin terminals for damage or loose connection with harness connector.
Check the stop lamp switch pin terminals for damage or loose connection with harness connector. Check the steering angle sensor pin terminals for damage or loose connection with harness connector. However, this is not a malfunction, if normal operation can be resumed after restarting engine.
Check the yaw rate/side G sensor pin terminals for damage or loose connection with harness connector. Check the brake fluid level switch harness connector for disconnection or looseness. Check the brake fluid level switch pin terminals for damage or loose connection with harness connector.
Manual Cover
General