Manual Description
While securely holding the square hole (A) in pulley center of auto tensioner (1) with a spinner handle, move spinner handle in the direction of arrow (loosening direction of drive belt). Remove holder (3) from air cleaner case (2), and then remove F air cleaner filter (1) from holder. J Install the air cleaner filter by aligning the seal with the notch of air cleaner case.
Measure the valve clearance as follows: Use the feeler gauge (commercial service tool) of curved-tip. This allows the feeler gauge to access the clearance between camshaft and valve lifter with ease. Rotate crankshaft 240 degrees clockwise (when viewed from engine front) to align No.
Check that the valve clearances for cold engine are within the specifications by referring to the specified values. Install compression gauge with an adapter (commercial service tool) onto spark plug hole. When the gauge pointer stabilizes, read the compression pressure and the engine rpm.
Manual Cover
General