Manual Description
Check wheels for deformation, cracks and other damage. If the camber is not within specification, inspect and replace any damaged or worn rear suspension parts. Make sure that no one is in front of the vehicle before pushing it.
Bounce rear of vehicle up and down to stabilize the posture. Put a mark on base line of the tread (rear side) of both rear tires at the same height of hub center. Push the vehicle slowly ahead to rotate the wheels 180 degrees (1/2 turn).
Adjust toe-in by varying the lengths of rear parallel links. Tighten lock nut while holding rear parallel link with wrench AT to prevent bushing from twisting. If any of the following occurs, replace wheel hub bearing assembly.
Manual Cover
General