2002 Nissan Altima Repair Manual - Enging Cooling System (Section CO)

2002 Nissan Altima Repair Manual - Enging Cooling System (Section CO)
Posted on 24 May, 2015
Model: 2002 Nissan Altima
Pages: 48


File size: 1 MB

Download Manual

Manual Description
Use compressed air lower than 490 kPa (5 kg/cm2 , 71 psi) and keep distance more than 300 mm (11. Blow air again into all the radiator core surfaces once per minute until no water sprays out. Remove the radiator upper clips by pulling the tabs outside to release the lock, as shown.

Align the radiator upper clip with the radiator core connection, then insert the radiator upper clip straight into the radiator core G connections until a click is heard. After connecting the radiator upper clip, use the following method to make sure it is fully connected. Check that there is no looseness in the vane shaft, and that it turns smoothly when rotated by hand.

The valve opening temperature is the temperature at which the valve opens and the falls from the thread. Install the thermostat with the whole circumference of the flange G part fitting securely inside the rubber ring. Remove the upper radiator hose, heater pipe, throttle body inlet hose, and heater hose.


Manual Cover
2002 Nissan Altima Repair Manual - Enging Cooling System (Section CO) Image


General
Year 2002
Make Nissan
Model Altima
Language English
Pages 48
Filetype PDF (Download)
File size 1 MB

Privacy Policy    Contact us