Manual Description
Be sure to turn ignition switch off and disconnect negative battery terminal before checking the circuit. C Each control unit transmits/receives data but selectively reads required data only. According to the check sheet results (example), start inspection.
Check following terminals and connector for damage, bent or loose connection (control module-side, meter-side and harness-side). Check terminals and connector of combination meter for damage, bent or loose connection (meter-side and harness-side). Repair harness between harness connector M71 and combination meter.
Each control unit transmits/receives data but selectively reads required data only. Check following terminals and connector for damage, bent or loose connection (control module-side, G meter-side and harness-side). Check following terminals and connector for damage, bent or loose connection (control module-side and harness-side).
Manual Cover
General