Manual Description
Pull out 5th & reverse fork rod and remove 5th shift fork and 5th & reverse bracket. Remove retaining pin of 1st & 2nd bracket using pin punch and separate 1st & 2nd fork rod and bracket. While tapping input shaft with plastic hammer, remove input shaft assembly, mainshaft assembly and reverse idler gear assembly as a set.
Using a drift, install a new input shaft oil seal from the clutch housing end of side to the depth of 1. Install input shaft assembly, mainshaft assembly, and reverse A idler gear assembly into clutch housing. Install 1st-2nd fork rod bracket onto 1st-2nd fork rod, and then install retaining pin.
Install 1st-2nd fork rod and 1st-2nd shift fork, and then install H retaining pin. Install 3rd-4th bracket, 3rd-4th shift fork, and 3rd-4th fork rod L with inter lock pin. Install shifter cap onto reverse lever assembly cam, and then install them onto reverse shift fork.
Manual Cover
General