Manual Description
Place a piece of tape across the spiral cable so it will not be rotated out of position. Also, with the steering linkage disconnected, the cable may snap by turning the steering wheel beyond the limited number of turns. If the steering gear must be removed, set the front wheels in the straight-ahead direction.
Remove the steering wheel before disconnecting the coupling joint to avoid damaging the spiral cable. When installing steering column mounting nuts, first tighten the lower steering column mounting nuts and then the upper mounting nuts to specification. Ensure the number of turns are the same from the straight-forward position to left and right locks.
Key Remove the tamper resistant self-shear type screws with a drill or other appropriate tool. After installation check for smooth steering wheel rotation, I without any catches or noise. During lower joint detachment, insert a tool into the yoke groove to prevent gouging damage.
Manual Cover
General