Manual Description
Position an oil pan under the automatic transaxle's inlet and outlet cooler hoses. Disconnect the fluid cooler inlet and outlet rubber hoses from the steel cooler tubes or bypass valve. Position an oil pan under the banjo bolts that connect the fluid cooler steel lines to the transaxle.
Blow compressed air regulated to 5 - 9 kg/cm2 (70 - 130 psi) through each steel line from the cooler side back toward the transaxle for 10 seconds to force out any remaining fluid. Tie a common white, basket-type coffee filter to the end of the cooler inlet hose. C When forward clutch 15 is engaged, to stop rear internal gear 13 from rotating in opposite direction against engine revolution.
However, brake band does not contract because oil pressure area on the release” side is greater than that on the apply” side. D: Operates when throttle opening is less than 3/16, but does not affect engine brake. The parking pawl engages with the parking gear to mechanically hold the output shaft so that the power train is locked.
Manual Cover
General