Manual Description
Connect satellite radio tuner (factory installed) connector and audio unit connector. The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning. This system includes seat belt switch inputs and dual stage front air bag modules.
Remove the tweeter speaker screws (A), disconnect the tweeter speaker connector and remove the tweeter speaker (1). Remove the front door speaker screws (A), then disconnect the front door speaker connector and remove the front door speaker (1). Remove the rear speaker screws (A), then disconnect the rear speaker and remove the rear speaker (1).
Remove the steering wheel switch assembly screws (A), then remove the steering wheel switches (1). Apply a constant stream of hot air directly to the repaired area for approximately 20 minutes with a heat gun. Verify relation between the symptom and the condition when the symptom is detected.
Manual Cover
General
